February 05, 2026 2 min read
If you mow your own lawn, you know the routine: wrestle the gas can over to the mower, tip it up, aim at a small opening, and hope. More often than not, a little fuel ends up on the mower deck, the driveway, or your hands. It seems harmless. It isn't quite.
Why a little spilled gas matters
- Damages surfaces — fuel discolors concrete and degrades rubber, plastic, and paint over time.
- Wastes money — small spills every mow add up across a season.
- Creates a fire risk — fuel on a warm engine or near a spark is a hazard.
- Harms your lawn and storm drains — gasoline kills grass on contact and is an environmental contaminant.
The root cause is almost always the same: pouring from a heavy, awkward container into a small opening with no flow control.

The common mistakes
- Tipping a full, heavy can and overshooting when the fuel "glugs" out in surges.
- Filling a hot mower right after use — let it cool first.
- Overfilling the tank, which then sloshes and leaks.
-
Using an old, cracked spout that drips and won't seal.
The simple fix
Stop pouring and start pumping. A gas can pump sits in the can, keeps it flat on the ground, and moves fuel through a flexible nozzle into the tank. You control the flow with a button instead of your shoulders: no lifting a 30-pound can, a steady stream instead of a glugging surge, and auto-stop that ends the flow when the tank is full.
A battery-powered pump turns a messy two-minute chore into a clean 30-second one. DeWay's gas can pumps are designed for exactly this everyday homeowner task — light to handle, AA-powered with a USB-C power option, and spill-conscious by design.
A quick clean-fueling checklist
- Let the mower cool before fueling.
- Place the gas can on flat ground.
- Insert the pump and guide the nozzle into the tank.
- Pump until auto-stop engages or the tank nears full — don't top off.
- Wipe the nozzle and cap both the tank and can.

FAQs
Why does my lawn mower smell like gas after I fill it? Usually from minor spills or overfilling. Wiping the deck and avoiding topping off fixes most fuel smells.
Can I use the same pump for other equipment? Yes — a good transfer pump works for mowers, snow blowers, pressure washers, generators, and more.
Is a gas can pump worth it for occasional mowing? If clean hands, no spills, and not lifting heavy cans matter to you, yes — even occasional users notice the difference immediately.

